What does the tubing decal tell me?

The tubing decal on the seat tube tells you what you're buying. Reynolds 531 is the most common quality British tubeset — strong, well-riding, and used on everything from club bikes to professional race machines. 531c (competition) is lighter with thinner butting. Reynolds 753 is the premium — it requires specialist brazing and rides more responsively, but it's thin-walled and dents more easily. Columbus SL is the Italian equivalent of 531 — the default for mid-to-high-end Italian frames. Columbus SP is lighter, and Columbus SLX has oversized tubes for stiffness. Tange Prestige and Champion are the Japanese equivalents. Vitus 172 and 979 are the French options — 979 was a pioneering aluminium tubeset. Hi-tensile steel (unmarked, or wearing "high tensile" stickers) is entry-level — heavy and dead-feeling, but serviceable.

Which British frame builders are worth buying?

Britain produced world-class frame builders to rival the Italian and French marques, and their work is now highly collectible. Mercian (Derby) still operates and their vintage frames are among the most sought-after. Bob Jackson (Leeds) produced quality frames for decades. Jack Taylor (Stockton-on-Tees) specialised in touring and tandem frames with distinctive twin-lateral stays. Harry Quinn (Liverpool) was known for track and road racing frames. Holdsworth produced both mass-market and high-end racing frames. Carlton (Worksop, later absorbed by Raleigh) made racing bikes under their own name and for Raleigh's professional team. Hetchins are the ultimate collector's frame — curly stays and ornate lugwork command four-figure prices.

Are Italian and French frames a safe buy?

Colnago (Master, Super, Mexico) are the most recognised Italian vintage frames, with a distinctive star fork crown and clover-leaf tubing on the Master. De Rosa (Professional, Neo Primato) are equally revered. The Cinelli Supercorsa is a classic racing frame, and Bianchi is recognisable by its celeste green paint. Pinarello, Tommasini and Masi complete the Italian top tier. French frames — Peugeot PX-10, Gitane Tour de France, Motobécane — used different threading standards (French bottom bracket and fork) which complicates parts sourcing, so check thread standards before buying a French frame.

Will modern parts fit a vintage frame?

Vintage frames use older standards that aren't always compatible with modern parts, so expect more sourcing work than with a current endurance frame. British and Italian frames use different bottom bracket threading — English/BSA (1.370" x 24tpi) against Italian (36mm x 24tpi, right-hand both sides) — and French frames use yet another standard (35mm x 1mm). Fork steerers are 1" threaded, not modern 1-1/8" threadless. Seatposts are often non-standard diameters — 26.8mm, 27.0mm or 27.2mm depending on tube specification. Rear dropout spacing is typically 120mm (5-speed) or 126mm (6/7-speed), while modern wheels use 130mm, so cold-setting the frame may be needed. A frame builder can advise on compatibility.

What should I inspect before buying?

Rust is the primary concern. Check inside the seat tube by pulling the seatpost — surface rust is fine, deep pitting weakens the tube. Inspect the bottom bracket shell for water damage, and look at areas where paint chips have exposed bare steel, around cable guides, bottle cage bolts and dropout faces. Check frame alignment by standing behind the bike and verifying the rear wheel centres between the chainstays. Bent fork blades, swept backwards from a frontal impact, are common — view the fork from the side against a straight edge. Examine lug joints for brazing cracks, especially around the head tube. Dents in thin-walled Reynolds 753 tubing can weaken the frame, so avoid dented 753. The same patience pays off across used road frames generally, but steel rewards it most.

Restore or preserve the original paint?

Original paint in good condition adds significant value to collectible frames — don't repaint a Colnago Master or Mercian with an intact original finish, and treat pantographed details (the brand name filed into the fork crown or lugs) as irreplaceable. For riders rather than collectors, a quality respray from a specialist such as Argos Racing Cycles or Cyclomondo costs £200-400 and gives a second life to tired frames. Keep all original components if you strip a frame for repainting, as period-correct rebuilds command premiums, and a stripped frame is still a strong basis for a retro build if you want steel rather than a modern aero frame. Chrome on fork tips, stays and lugs should be checked for flaking — re-chroming is expensive but possible.

Mavic shoe